For HP 17-BY 17-CA Bottom Case Cover L22509-001

For HP 17-BY 17-CA 17T-BY 17Z-CA Laptop Bottom Base Case Cover L22509-001 Pale Gold

Product Description

The HP 17-BY 17-CA Bottom Cover is the base enclosure of the HP 17-BY 17-CA laptop, the part number is L22509-001, the color is pale gold, with ODD( Optical Disk Driver ). With different colors bottom base enclosure lower cover for HP 17-by 17-ca 17t-by 17z-ca laptop, as below:

Natural silver part number: L22508-001; Black part number: L48405-001; Gray part number: L22512-001. Blue part number: L47073-001.

To replace the bottom of an HP 17-by laptop, follow these steps:
1. Power off the laptop and unplug any cables or peripherals connected to it.
2. Turn the laptop upside down so that the bottom is facing up.
3. Locate the screws that secure the bottom cover. These screws are usually marked with small icons or symbols.
4. Use a screwdriver that matches the size of the screws and carefully remove them one by one. Keep the screws in a safe place as you will need them later.
5. Once all the screws are removed, gently lift the bottom cover. Be cautious not to force it as there may be clips or tabs holding it in place.
6. If you encounter resistance while lifting the cover, double-check for any remaining screws that may have been missed.
7. Once the cover is removed, you can access the internal components, including the battery, hard drive, and RAM.
8. To replace the bottom cover, align it with the laptop chassis and carefully press it down until it snaps into place. Ensure that all the clips and tabs are properly secured.
9. Reinsert and tighten the screws in their respective positions, making sure not to overtighten them.
10. Turn the laptop back over and power it on to confirm that the bottom cover replacement was successful.

Condition: 100% Original Brand New

Compatible Model: HP 17T-BY 17Z-CA 17-BY 17-CA Series

Color: Pale Gold

MPN: L22509-001

Type: Bottom base case with pale gold color.